Menu
CRACK INJECTION & LEAK SEAL ACCESSORIES
High Pressure Crack Injection Valve
Control resin flow at the point of injection and turn an airless sprayer into an injection pump.
Flush Wand
Use this essential tool to flush concrete dust from the holes you have drilled for crack injection.
High Pressure F-Valve Assembly
Twin streaming is a technique in which you use a high pressure F-valve to inject resin AND water at the same time. As you can see in the photo, the F-valve has two supply connections – one for water and one for resin. The water and resin come into contact before they exit the coupler.
Oakum
Seals cracks and slows down gushing water during leak repair. Oakum can be used alone or in combination with Alchemy-Spetec leak seal resins. Read more about AP Oakum.
Ports
Alchemy-Spetec offers pretty much all of the required mechanical ports and accessories you could possibly need for your next chemical injection project. See a few examples below and read more about our entire selection here…
5/8″ Mechanical Packer
1/2″ Mechanical Packer
13mm Mechanical Packer
3/8″ Hammer In Port with Zerk Fitting
3/8″ Plastic Drive In Port
For injection of chemical grouts into new or stable concrete.